GP10CU from XTC Luoyang is a kind of Tungsten Carbide Powder made from fine WC, the chemical composition is 86WC-10Co-4Cr. It is often called as Thermal Spray Powder of HVAF HVOF Powder since it is normally used by HVAF/HVOF application to spray, which will form an intensive coating with compact microscopic structure and high bonding strength ( ≥70MPa) on surface of the workpieces so as to offer them with wear resistance and corrosion resistance.
This High Temperature Powder could be operated under the temperature of 500°C, and could be used for Flame Spray Coating. It is usually applied to corrugator rollers of papermaking industry and gate valves or ball valves to extend their service life so as to save cost of factories.
The powder is in spherical shape because it is produced by agglomerate and sinter process. SEM photos are as below:
The Thermal Spray Coating micro hardness is 1000-1300 HV0.3 with porosity less than 1%, and the deposit efficiency is 45-60%. It is a very commonly used thermal spray powder, is suitable for steel, oil/gas and papermaking industries.
Product Categories : Thermal Spray Materials > Tungsten Carbide Powder
Tungsten Carbide and Cobalt HVOF Powder
WC-20Cr3C2-11NiMo 5-30um Thermal Spray HVOF/HVAF Powder
WC-19Cr3C2-16Ni 5-30um Tungsten Carbide Thermal Spray Powder
WC-20Cr3C2-11NiMo 5-25um Thermal Spray HVOF/HVAF Powder
WC-19Cr3C2-16Ni 15-38um Tungsten Carbide
WC-10Ni-5Cr 20-53um Tungsten Carbide Thermal Spray Powder
WC-19Cr3C2-16Ni 5-25um Tungsten Carbide Thermal Spray Powder
WC-19Cr3C2-16Ni 15-45um Thermal Spray Powder