EXCELLENT WC12CO FINE POWDER 5-30um

Model No.:GP12-19

place of origin: China

Packaging: 5KG/BOTTLE, 20KG/BOX

Productivity: 500T/YEAR

Brand: CXTC

Transportation: Ocean,Land,Air,Express

Place of Origin: CHINA

Supply Ability: 500T/YEAR

HS Code: 8110003090

Port: SHANGHAI,BEIJING,QINGDAO

These products are spheroidal powders for thermal spraying containing 88% tungsten carbide as a hard material and a cobalt matrix that functions as a binder material for the carbide particles. All products are agglomerated and sintered powders Coatings of these materials are harder compared to coatings of 83WC-17Co as a result of higher tungsten carbide levels. Coatings are resistant to sliding wear, hammer (impact) wear, abrasion and fretting at temperatures up to 500 °C (930 °F) in non-corrosive media. Coatings that contain tungsten carbide protect substrates from the effects of fretting, abrasive grains, particle erosion, cavitation and dynamic contact with hard surfaces. In particular, these materials can be used for abrasion-resistant coatings in dry, non-corrosive environments at temperatures up to 500 °C (930 °F). HVOF and APS (using a TriplexPro™ series gun) coatings of these materials are dense and show good bond strength. 1.1 Typical Uses and Applications Tungsten carbide – 12 cobalt materials from Oerlikon Metco are among the best-known thermal spray powders for use in wear applications at service temperatures below 500 °C (930 °F) in non-corrosive media. Typical applications include: n Steel rolls n Sink rolls in zinc pots n Corrugating rollers n Agricultural rasp bars n Exhaust fans n Conveyor screws n Sucker rod couplings n Thread bars n Pump housings n Impeller shaft

Product Categories : Thermal Spray Materials > Tungsten Carbide Powder